Thermia air-source heat pumps for homes and boiler replacement
Heating, cooling and hot water from an air-to-water heat pump, without drilling and with units that work down to −25 °C.
How it works
An air-to-water heat pump takes heat from the outdoor air, even in cold weather, and carries it to the heating and hot water circuits. It moves heat instead of producing it, so it delivers several times more energy than it uses.
One installation for winter and summer
It also cools: in summer the unit reverses its cycle and takes heat out of the house. With underfloor heating or fan coils, one machine covers heating, hot water and cooling, with no separate air conditioning.
Where air-source fits
- New homes, with underfloor heating or fan coils.
- Replacing a gas or oil boiler, without any drilling.
- Refurbishments where radiators are kept or fan coils are added.
- Homes with no space or access for a drilling rig.
- Cold areas: Thermia units are working in Segovia, León and Huesca.
If the aim is maximum efficiency and space is not a constraint, geothermal usually performs somewhat better.

Why Thermia
- Designed, made and tested in Sweden.
- Natural refrigerant R290 across the air-source range.
- Operation with outdoor temperatures down to −25 °C.
- Indoor units with or without a hot water tank, to suit the plant room.
- Control from your phone with MyThermia, and Girod technical service for the whole range.
Thermia air-source range
The Thermia Elve with Idun indoor unit reaches 75 °C flow temperature and produces up to 700 litres of hot water at 40 °C. The Thermia iTec XTR, from 1 to 16 kW, covers small homes up to large houses. Both work down to −25 °C. Datasheets are on our products page (in Spanish).
How we work
Girod distributes Thermia and works with a network of installers it trains and supports. We run the feasibility study, put you in touch with an installer, and then look after technical service and maintenance. Where aid exists, we handle the application with you.
Frequently asked questions
Air-source or geothermal?
Air-source needs no drilling and is installed sooner. Both are very efficient, but geothermal performs better, especially in the cold, and needs no outdoor unit. The choice depends on the plot, the budget and the building’s demand.
Can it replace a gas or oil boiler?
Yes, it is the most common refurbishment. Existing radiators can be kept, at somewhat lower efficiency, or combined with fan coils.
Does it work with radiators?
Yes. With radiators at 55 °C the Thermia Elve SCOP is 3.99 to 4.01, against 4.96 with underfloor heating. Radiators cannot cool: for summer cooling you need fan coils or underfloor cooling.
Is there any financial aid?
When a fossil fuel such as gas or oil is replaced, deductions and grants may apply. They are not always available and we cannot guarantee them, but Girod looks for them and handles the paperwork with you.
What is an air-source heat pump?
An air-to-water heat pump takes heat from the outdoor air, raises its temperature and delivers it to the home as heating and hot water. It can also cool in summer.
Does it work in very cold weather?
It depends on the model. Thermia Elve and Thermia iTec XTR work with outdoor temperatures down to −25 °C. Performance drops in the cold, which is why sizing matters.
Is the outdoor unit noisy?
Every outdoor unit makes some noise. Thermia Elve declares 42 dB(A) sound pressure at 4 m in free field for the L model and 43 dB(A) for the XL. Placement relative to neighbours’ windows is part of the design.
Tell us about your project and we will tell you which system fits
The feasibility study is free and carries no obligation. We analyse the building, the ground and the heating and cooling needs.